Маглем - Серия HABS

The HABS current sensor is fixed on the battery cable of a car. It provides to a calculator (BCM) the actual value of current in the cable. The current value is modulated by a PWM electrical signal. The sensor is linked to the BCM with the car harness. The electrical connection is made with a waterproof connector.

Bandwidth: DC to 100 to 1000 Hz
Response time : < 10 ms
Current range defined by the peak current and minimum current to measure
Large dynamic of the current to measure (more than 10)
Temperature range : -40 to 85 or +125°C
Overcurrent (cranking)

Модель	Номинальное значение первичного сигнала	Диапазон преобразования	Вторичный сигнал	Напряжение питания (В)	Точность (%)	Тип монтажа
HAB 100-S/SP1	100 A	100 A		5-5 Uni	2.9	On primary fastening